| Control phase | Single phase |
| Rated load voltage | 220VAC~ |
| Rated load current | 150A |
| Control output | ᆞAutomatic control: DC4-20mA, 1-5VDC , ON/OFF contact (no voltage input), pulse voltage (5-12VDC )
ᆞConventional control: external control (10kΩ), internal control (output limit) |
| Power supply | 100-240VAC~ 50/60Hz |
| Minimum load current | 1A |
| Allowable voltage range | 90-110% |
| Consumption source | Max. 12VA |
| Display method | 7-segment 3-digit LED |
| Set of directives | ᆞActive alarm display/Manual control display: green LED
ᆞAlarm display/output indicator display/unit display (v,a): red LED |
| Control method | Phase control: normal control mode, fixed current/fixed voltage/fixed power feedback control mode
ᆞCycle control: fixed cycle control mode
ᆞON/OFF control |
| Download application | ᆞPhase control, ON/OFF control: reactive load, inductive load
ᆞcycle control: load resistance |
| Digital input | ACTIVE/STOP switching, AUTO/artificial switching, RESET |
| Alarm output | 250VAC~ 3A, 30VDC 3A, 1c resistive load |
| Output range | Phase control: 0 to 98%, cycle control: 0 to 100%, ON/OFF control: 0%, 100% |
| Output accuracy | ᆞNormal control: within ±10% F.S. of rated load voltage
ᆞStatic current feedback control: within ±3% F.S. of rated load current
ᆞStatic voltage feedback control within ±3% F.S. of rated load voltage
ᆞStatic source feedback control: within ±3% F.S. of rated load source |
| Installation Type | By front keys, by communication |
| Function | Output limit (OUTPUT ADJUSTABLE), AUTO/artificial selection, control method selection, RESET, SOFT START, UP/DOWN soft start, high/low output limit, correction input, input slope correction, monitoring (control input, load voltage/current/power/resistance, power supply frequency |
| Warning function | Over current alarm, over voltage alarm, fuse break alarm, component failure alarm, over temperature alarm, over temperature alarm |
| Cooling method | Reduce temperature (by fan) |
| Insulation | 200MΩ overload (at 500VDC megger) |
| Dielectric strength | 2,000VAC~ 50/60Hz for 1 min (between input and power) |
| Line leakage output | Max. 10mArms |
| Noise resistance | Square wave noise ±2kV (pulse width: 1㎲) mechanical noise |
| Memory protection | ≈ 10 years (permanent semiconductor memory type) |
| Vibrate | Amplification frequency 0.75 mm from 5 to 55 Hz (for 1 minute) in each of the X, Y, and Z directions for 2 hours |
| Vibration_Error | 0.5mm amplitude at frequency of 5 to 55Hz in each X |
| Ambient Temperature | -10 to 55℃, storage: -20 to 80 |
| Ambient Humidity | 35 to 85%RH, storage : 35 to 85%RH |
| Accessory | 11-pin connector, isolator: 4 |
| Weight | 9.7kg(Approx.8.7kg) |