Bộ đếm giờ Hanyoung T57N-P-03-C

Model

Code

Description

Model

Analog Timer

T38N

48.0(W)      59.0(H)

It’s necessary to use Panel Mount Adaptor in Case of Panel Type

T48N

48.0(W)      48.0(H)

T57N

E Size - 50.0(W)       62.0(H)

P Size - 57.5(W)       84.5(H)

TF62N

TF62D

Fixture type

E

Exposure type

P

Panel type

Time Range

01

1 sec / 1 min / 1 hour

03

3 sec / 3 min / 3 hour

06

6 sec / 6 min / 6 hour

10

10 sec / 10 min / 10 hour

30

30 sec / 30 min / 30 hour

60

60 sec / 60 min / 60 hour

12H

12 hour / 24 hour / 48 hour (exception : TF62N & TF62D)

Control output

A

Time - limit 1c + Constant 1a (For T38N / T48N / T57N)

B

Time - limit 1c + Constant 1c (For T38N / T48N / T57N)

C

Time - limit 2c (For T38N / T48N / T57N)

D

Time - limit 1c (For TF62N)

F

Time - limit 2c (For TF62D)

MOD

EL

Exposure type(E)

T38N

T48N

T57N-E

TF62N-E

TF62D-E

Panel type(P)

T57N-P

TF62N-P

TF62D-P

Function

POWER ON DELAY TIMER

TWIN TIMER

DUAL TIMER

Power supply

24 - 240 V a.c 50 - 60 , 24 - 240 V d.c

Allowable Voltage Fluctuation

% of Power supply voltage

Power Consumption

Less than 4.5 VA (at 240 V a.c 60       ), Less than 1.5 W (at 24 V d.c )

Return time

Less than 100

Time Range

01

0.01 ~ 1 s / 0.01 ~ 1 m / 0.01 ~ 1 h

03

0.01 ~ 3 s / 0.01 ~ 3 m / 0.01 ~ 3 h

06

0.01 ~ 6 s / 0.01 ~ 6 m / 0.01 ~ 6 h

10

0.01 ~ 10 s / 0.01 ~ 10 m / 0.01 ~ 10 h

30

0.01 ~ 30 s / 0.01 ~ 30 m / 0.01 ~ 30 h

60

0.01 ~ 60 s / 0.01 ~ 60 m / 0.01 ~ 60 h

12H

0.01 ~ 12 h / 0.01 ~ 24 h / 0.01~ 48 h ( 24h

)

‘12’ model is not availale

Time Error

Repeat error

Less than      0.3 % (ratio against Max. scale)

Setup error

Less than      5 % (ratio against Max. scale)

Contol output

Output mode

Power Time - limit

FLICKER (ON Start)

FLICKER (ON -A Start)

Contact construction

A type (Time - limit 1c + Instantaneous 1a) / B type (Time - limit 1c + Instantaneous 1c) / C type(Time - limit 2c)

D type (Time - limit 1c)

F type (Time - limit 2c)

Capacity

250 V a.c 3 A Resistive load

Life span of relay

Mechanical : More than 10 million times / Electrical : More than 100,000 times

Dielectric strength

2000 V a.c 50/60       for 1 minute

Noise

2 kV

Insulation resistance

More than 100      (Based on 500 V d.c mega standard)

Vibration (Durability)

10 - 55       (cycle :1 minute), Double amplitude 0.5       

for 2h.

Shock (Durability)

300      (30 G) X Y Z each direction 3 times

Ambient temperature

-10 ~ 55       Without freeze

Storage temperature

-25 ~ 65       Without freeze

Ambient humidity

30 ~ 85 % R.H.

Certification

cetified (Exception : TF62D)

Function                                                            

Contents                                                                          

T38N T48N T57N

1

Output Indication LED(UP LED)

After passing setup time. LED is ON at the same time when operating time-limit output.

2

Power Supply Indication LED(ON LED)

LED is OFF when timer works. LED is ON at the same time when operating time-limit output and its status will be maintained.

3

Time Display

It's possible to change time setup together with knob and you can change setup time in the middle of it's function.

4

Time unit setup switch (s/m/h)

It is consisted of Hour(h), Minute(m),Second(s). You can set and use time unit what you need.(Available to change it when Power is OFF)

TF62N

1

Flicker-ON output indication LED

In case of Flicker-ON, LED is ON at the same time when operating time-limit output.

2

Flicker-OFF output indication LED

in case of Flicker-ON, LED is ON at the same time when stopping time-limit output.

3

Flicker-ON time display

It is used to set operating time of time-limit output in the Flicker-ON mode. Setup time could be changed during operation of timer.

4

Flicker-ON time unit setup switch

It is consisted of Hour(h), Minute(m), Second(s). You can set and use ON time unit what you need.(Available to change it when Power is OFF)

5

Flicker-OFF time display

It is used to set stopping time of time-limit output in the Flicker-ON mode. Setup time could be changed during operation of timer.

6

Flicker-OFF time unit setup switch

It is consisted of Hour(h), Minute(m), Second(s). User can set his own Flicker-OFF time unit (Available to change it when Power is OFF)

TF62D

1

LED for indicating output of Dual-B ON

In case of Dual function, LED is ON at the same time when operating B output.

2

LED for indicating output of Dual-A ON

In case of Dual function, LED is ON at the same time when operating A output.

3

LED for indication output of Dual A/B OFF

In case of Dual function, LED is OFF at the same time when stopping A output or B output.

4

Setup time dispaly of Dual A/B ON

It is used together with knob to set ON operation time setup of A output and B output. Setup time could be changed during operation of timer.

5

Time unit setup switch of Dual A/B ON

It is consisted of Hour(h), Minute(m), Second(s). It is used to set ON time unit of A output and B output. (Available to change it when Power is OFF)

6

Setup time dispaly of Dual A/B OFF

It is used to set OFF operation time setup of A output and B output. Setup time could be changed during operation of timer.

7

Time unit setup switch of Dual A/B OFF

It is consisted of Hour(h), Minute(m), Second(s). It is used to set OFF time unit of A output and B output. (Available to change it when Power is OFF)